INSTRUCTIONS

Step 1: Seed Articles

Input Folder: Browse through your hard disk and select the folder where you want the software to extract information from. This folder should contain articles in TXT format which can be opened with notepad. Once you select the folder, article tool will detect all the TXT files and will list them below.

Output Folder: This is where you want the output files to be extracted after you complete the whole manipulation process.

Select Articles: You can select individually the articles (found in input folder) in the list which has been presented to you or you can select all by clicking on the Select All button.

Note: provide as many files as possible so that the software will have a very large database of content from which it can pick information and your content will be more unique.

There are 3 options presented on the right, you may select one or all 3 choices. It depends what you want to do. For the purpose of this tutorial I’ll choose all 3 so that you can see all the features that are presented in using this software.

Swap articles: this allows you to interchange content from one article to another. So it will just pick up a few sentences or paragraph to build up a new one.

Replace Synonyms: The software has a built in database of thousands of synonyms. If selecting this feature, you will allow the software to automatically substitute words with synonyms. You will also be able to set a % of change to the content.

Insert Custom Text: This part allows you to enter multiple text and paragraphs that will be randomly entered at the top, middle and bottom of the articles.

OK now remember, I select all 3 options. Consequently all the features of the software will be enable.

Step 2: Swap Articles

Prefix Keyword: This is the filename of individual files to be used once the articles are being created.

Paragraphs per file: This refers to the number of paragraph you want each article to contain when created automatically.

Articles to create: Refers to the number of articles to be created in total.

Step 3: Synonym Manager

You can select a group of synonyms that you may want to use to manipulate the content. You can add your own synonyms or even some group synonyms. You can select a few of them or select all of them.

This part can be completely customized by you. Infact, this part is very important and will determine how good your output article will be. Providing an accurate “library” of words based on the article topics will greatly help in the quality of the output articles.

Step 4: Replacement Level

You can have multiple copies of the versions you want to create. Just enter a figure and they will be created.

You also choose the % of the text to be manipulated. We recommend 15% for most cases. But if you have a very accurate synonyms list that you have personally added, you can go up 75%. But again, you’ll have to check it and see if everything is fine and the sentences are readable.

Step 5: Keywords To Ignore

These are keywords that you don’t want the software to change within the content. Those words will remain intact. You can enter as many as you want.

Step 6: Insert Header, Middle and Footer

This part is for the 3rd option selected in step 1.

With this you can enter standard paragraphs which will be place at the top, middle and bottom of the articles. You can use ads and what ever content you wish to break the original article.

Step 7: Insert Text Blocks…

This is almost same as step 5 but instead it is more random. It adds multiple lines of text after one or 2 paragraph through out the whole article to make it unique.

Step 8: You are done!

Click the PROCESS NOW button and the articles will be created in the output folder you selected in step 1.

 

 

Keyword Search Function: You can search for blog posts that are related to your niche with the keyword in its content.

1. Enter the keyword that you would like to conduct the search under.

2. You can also enter in your domain name to check if your link is already on the blog.
This helps you to keep track of your link building efforts.

3. You can choose the depth of the searches under ‘Search Deep’.

*Hint* The deeper the searches, the more results you will get.

4. Click on ‘Search’ to begin searching the Internet for the blogs.

5. The results show the URL of the blog post, the page rank of the home page that post is found in (under ‘Home Page PR’) and its Alexa ranking. You can use the information to help you decide whether to leave comments on the site.

6. You can either select all the search results or click individual results that you want
to delete from the list. Click on ‘Delete Selected’ or ‘Delete All’ to remove unwanted search results.

7. Click ‘Save Results’ to save the list of search results for reference and for use later on.

Content Comparison: Compare two articles side-by-side and check for their similarities, calculate keyword densities and amount of duplicate content using the tool.

1. You can import two different articles into the tool. One will be shown on the right-hand window pane of the program while the other in the left.

2. Import the articles that you want to compare and analyze by clicking on the ‘Import’ button which is found on left hand corner of each window pane. Each import button corresponds with the window pane above it.

3. Then in the file browser box, find and select the article that you wish to import. Make sure that the file is in either of the following formats:

a. Microsoft Word (*.doc)

b. Text File (*.txt)

c. Rich Text Format (*.rtf)

4. You can also type your article contents directly into the window panes.

5. Or you can also use the standard ‘Copy, Cut and Paste’ function where you highlight your
content from another application, click ‘Copy’ in that application and then press ‘Ctrl-V’ in
the Duplicate Content Checker tool to paste the content into the window panes of the program.

Make use of the following Windows shortcut keys to help you:

a. Ctrl-X :Cut

b. Ctrl-C: Copy

c. Ctrl-V: Paste.

6. If you want delete the content entered in the window pane, just click on ‘Clear’ button which is found at the bottom.

7. Click on the ‘Compare’ button which is found on the top left hand corner of the program to start run the comparative analysis of both texts. You’d realized that matching words that are found in both texts are highlighted as the analysis goes. Words that are found in both articles will be highlighted in different colours. This is for you to be aware of the similarities of the content at a glance.

8. However, should you need to clear the highlighting, just click on ‘Clear Highlighting’ button found below the respective window panes.

9. You can keep track of the number of words, sentences and paragraphs found in your article in the boxes found below the window pane.

Content Analysis: Check for keyword density and duplicate content percentage which can help you to better optimize your content for SEO purposes.

10. You can check the keyword density of the content by entering in your keyword phrase below each window pane. And then click on ‘Calculate Keyword Density’ button to find out the percentage of keyword phrases in the content found in the related window pane. It is recommended that the percentage is kept between 1.5% to 6.5%.

11. The keyword phrase count or ‘No.’ lets you know the number of times the keyword appears in the text and the phrases are highlighted for you to know where their positions are in the text.

12. The ‘Minimum Length of The Matching Parts’ box determines what the minimum size of text to be considered when the program analyses for duplicate content. The preset sizes are words, sentences and paragraphs. Just enter in the number of matching parts in the entry box and then select the size that you want.

13. The ‘Duplicate Content’ box at the bottom of the program is the analysis percentage done after summarizing the duplicate content or similarities between the two texts in terms of a percentage value. The duplicate content percentage is recommended to fall below 35%.

 

Forum Poster Function: This software allows you to customize forum posts and helps you to organize them easily. You can keep a list of forums that are related to your niche as well as save your forum contributions.

1. Enter the ‘Subject’ and your message in the Message Editor panel. You can customize the content to your preference and enter either plain text or in HTML or any other forum codes.

2. Click on the ‘Save’ button at the top to save the message for future references and usage.

3. The Browser panel of the program allows you to surf the internet, primarily to go online to visit forums related to your niche. Enter the URL of the forum that you would like to visit. Add it to the Your Forums panel by clicking on ‘Add Current URL’. This panel keeps a list of the forums your visit. Enter in your ‘Username’ and ‘Password’ for the forum as well for easy access.

4. Browse the forum to find a thread that you would like to post a message in.

5. Click on ‘Load’ to load a previously saved message.

6. Click on ‘Preview’ to see how your message will look like before posting it.

7. Once you are satisfied with the message, just click on ‘Paste Message on Selected Field’. Once the form is complete, click the submit button on the posting page of the forum.

8. You can then repeat steps 1 to 7 for another forum.

Step 1: Info Box Settings

You can manipulate the border, size, font, color and background of the info boxes which are displayed below as a preview.

As you make changes to the values in the settings, you can instantly preview how the info boxes will look like.

Once done, click the next button.

Step 2: Select the target element of your info box

You have 4 choices how you want the info boxes to be displayed. You can either choose if you want it to appear when the user will hover their mouse on the

(a) Text link

(b) Image

(c) Table

(d) <div> tag.

Choose anyone of them according to your preferences. Then go to next step.

Step 3: Enter the content of your info box

This is where you enter the text of your info box. You just have to follow the structure like the preview in Step One.

Step 4: Generate

You just have to click the button “Finish” and voila!

A window will popup and will tell you where the html file has been generated on your PC. Then, you have to copy and paste the javascript code provided within your <head> tag:

<link rel=”stylesheet” type=”text/css” href=”infostyle.css”>

<script language=”JavaScript” type=”text/javascript” src=”info.js”></script>

That’s it. You are done!

 

Simple Cloak: This is a simple and direct of link cloaking method.

1. Enter the affiliate link you would like to cloak.

2. Enter the page title you would like to use.

3. Click on ‘Create Page’ and save the file according to how you want your link to be cloaked. For instance, if you want to cloak a link as http://www.imtoolcreators.com/hostgator.htm, save the file as ‘hostgator.htm’.

Thereafter, upload to your server.

Advanced Cloak: This allows you to cloak your links stealthily and enable you to redirect your traffic to whichever URL you want and still get credited for your commissions because of the cookie placed.

Furthermore, the URL in the address bar will change accordingly to the one you’ve indicated, hence people may not even notice it’s an affiliate link.

1. Enter the affiliate link you would like to cloak.

2. Enter the display URL or chosen destination of your choice.

3. Click on ‘Create Page’ and save the file according to how you want your link to be cloaked. Thereafter, upload to

your server.

Some suggestions for using advanced cloak:

1. If your merchant leads people to their squeeze page first, you can bypass it by entering the sales page directly instead.

2. If you have presold your list before and would like to bypass the sales page altogether, use the advanced cloak to cloak the order link and direct your list to order straight away.

3. If your merchant has sucky sales copy, you can create a new sales page specially for promoting that particular affiliate program. Thereafter, use the advanced cloak function and cloak the order link and insert it in your sales page.

There are many other ways which I’m sure you can think of. Just be creative and I’m sure you this tool will create wonders for your affiliate campaigns

 

Project Creation Function: You can create a new project at the start of the program or choose to load an existing one.

1. Create a new project by clicking on ‘New Project’. Enter in your project name, expected start and end dates of the project and the priority category that the project falls under. Click on ‘Ok’ to create the project.

2. Your project will fall under the priority category it belongs to, which is under the ‘Projects’ panel found on the left hand side. Click on the project name to edit details and view tasks of the project.

3. You can add new tasks for the project by clicking on ‘Add New Task’ and enter enter the task description, task details/ notes and the start and end dates of the task. Click on ‘Save’ to save the task.

4. You can edit the content of existing tasks by selecting the ‘Edit Selected Tasks’.

5. You can select the tasks that you want to remove from the project by clicking on ‘Remove Selected Tasks’

6. When a task is completed, the checkbox next to the task should be clicked on and this will indicate the percentage of project completion.

7. You can make use of the ‘Calendar’ function to check dates and manage your daily schedule.

8. Click on ‘Save Changes’ to update your project listings, schedule and content

Step 1: General Settings

Follow the instructions as provided. Enter the page title, your full name (used as signature for the sales letter) and date.

Browse inside your PC to select the graphics for your header, footer and product image. Then also select the background color of your page.

Step 2: Page Contents

Enter the headline of the sales letter. This is the first phrase you see at the top.

Enter the subheadline which is normally of a smaller font.

Introduction paragraph is where you start your letter. It starts like:

From: John Doe

Date: ….

Dear Friend,

Add a few paragraphs of content.

Step 3: Additional Page Contents

Introduce your product here. Tell a little more about it and how it can benefit them.

Step 4: Features

What are your product features? Add the main benefit in the title and then develop in the body. Change the font if need to make it impactful.

Step 5: Testimonials

This is where you enter testimonials and reviews of customers. You can change the font, the background and also the color.

Step 6: Ending Page Contents

The “closing statement” is just above the order button. This is where you ask the user to take action and order.

The “P.S” is a reminder after the signature. This is where you sum up the main benefit and also act them to take action now. It is the last part of the sales letter.

Step 7: Order Links Options

- Direct Link to Product Order Page: use this is you have a web form to filled in for the users to order. It should be a direct link to another page on your website.

- Clickbank: If you are using clickbank, just enter your clickbank ID, the product name refers to the NUMBER of the product in your clickbank account. It should be between 1 – 500. Just check your clickbank account to know. But by default it is 1. Then enter some description of the product in a few words.

- Paypal: This is where you enter the codes for your paypal button and link.

- Affiliate ID: Use this to promote Salesletter Pro on your sales letter. Just enter your paypal email address and you should be credited for each sales you make.

Step 8: Finish

Select the folder in which you want the sales letter to be created and click on Save Generated Code button. It’s done!